How to Become a Boilermaker Endorsement: Marine Fitter in British Columbia
Do you need certification?
Certification is voluntary
Boilermaker endorsement: marine fitter is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“See matrix of all Accredited, Recognized and Designated SkilledTradesBC Trade Programs . … Boilermaker Endorsement: Marine Fitter”
From skilledtradesbc.ca/find-your-trade, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 3 steps
- Licensed in another province: 2 steps
- Trained outside Canada: 5 steps, listed one-time fees $120
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 3 done
- 3 steps without a listed fee
-
Follow SkilledTradesBC's guidance on how to begin an apprenticeship in this trade.
Source
“Interested in this trade? Learn how to start your apprenticeship.”
skilledtradesbc.ca/boilermaker-endorsement-marine-fitter -
Register as early as possible with a SkilledTradesBC-designated training provider to secure a seat for technical training.
Source
“Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.”
skilledtradesbc.ca/boilermaker-endorsement-marine-fitter -
Complete 2460 hours of work-based training along with 8 weeks of technical training over 2 years.
Source
“Technical Training 8 weeks over 2 years Work-Based Training 2460 HOURS”
skilledtradesbc.ca/boilermaker-endorsement-marine-fitter
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
3 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 2 done
- 2 steps without a listed fee
-
Hold a full Certificate of Qualification from a trade board in another Canadian province or territory.
Source
“Mutual recognition only applies if you have your full certification or license.”
skilledtradesbc.ca/labour-mobility -
Meet the provincial or territorial Occupational Health and Safety requirements for the trade, which may include short courses or minor training specific to the jurisdiction.
Source
“You must meet provincial or territorial Occupational Health and Safety requirements for your trade, which may require you to complete short courses or minor training specific to the jurisdiction.”
skilledtradesbc.ca/labour-mobility
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
2 steps without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 5 done
- Listed one-time fees: $120
- 4 steps without a listed fee
- Listed time: 24 months (only 1 of 5 steps state a time)
-
Search for the trade and review the Employer Declaration or Statutory Declaration form to confirm the required hours of work experience, job task experience and prerequisite credentials.
Source
“Review the Employer Declaration or Statutory Declaration form (near the bottom of your trade page), where you can find the hours of work experience, percentage of job task experience and any prerequisite credentials required.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Create a SkilledTradesBC Portal account, selecting the option to challenge a certification exam, to start your application.
Source
“Once you’ve confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Complete and submit your application through the Portal with an Employer or Statutory Declaration for each period of work experience, ensuring all documents are in English.
Source
“For each period of work experience listed on your application, you must submit an Employer or Statutory Declaration (near the bottom of your trade page).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Pay the $120 application fee through the Portal and submit your application and declaration forms.
- Application fee: $120
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - Application fee: $120
-
Schedule and pass the certification exam, and any practical assessments if applicable, within 24 months of application approval.
Time: 24 monthsTime source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examSource
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Listed fees for this route
One-time total listed: $120
| Fee type | Amount | Share |
|---|---|---|
| Application | $120 | 100% |
| One-time total | $120 | 100% |
4 steps without a listed fee, so the total may not be the full cost.
Other listed fees
The regulator lists these without tying them to one step, so they are not in the route totals above. Check which apply to you.
- Certification exam rewrite fee: $100
Source
“3rd Attempt | Score below 70% on 2nd attempt | Contact your Apprenticeship Advisor for guidance and approval before scheduling a rewrite exam | $100”
skilledtradesbc.ca/index%2Ephp/exam-rewrites - Out-of-province assessment fee: $120
Source
“$120 out-of-province assessment fee. You can pay online, by mail or with a cheque (payable to SkilledTradesBC) with your application.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Requirements
Experience
You must have the required hours and scope of hands-on work experience in the trade to challenge the certification exam.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Other
Your references will be contacted by phone to verify your work experience, and if they cannot be contacted the application will be denied.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Already licensed in another province?
Direct transfer
SkilledTradesBC recognizes Certificates of Qualification from other Canadian provinces or territories, so holders do not have to re-certify or get a re-issued certificate. Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate.”
skilledtradesbc.ca/labour-mobility
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
Certification exam
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Level exam
Source
“If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.”
skilledtradesbc.ca/boilermaker-endorsement-marine-fitter
Language tests
Not stated by the regulator Check with SkilledTradesBC
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
No Job Bank wage or outlook data for this occupation yet.
Boilermaker endorsements: marine fitter in other provinces and territories
- Alberta Not confirmed yet
- Saskatchewan Not confirmed yet
- Manitoba Not confirmed yet
- Ontario Not confirmed yet
- Quebec Not confirmed yet
- New Brunswick Not confirmed yet
- Nova Scotia Not confirmed yet
- Prince Edward Island Not confirmed yet
- Newfoundland and Labrador Not confirmed yet
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Not confirmed yet
Compare boilermaker endorsement: marine fitter licensing across Canada
Sources checked
- Find Your Trade | SkilledTradesBC skilledtradesbc.ca/find-your-trade · fetched October 9, 2026
- Boilermaker Endorsement: Marine Fitter | SkilledTradesBC skilledtradesbc.ca/boilermaker-endorsement-marine-fitter · fetched October 9, 2026
- Labour Mobility | SkilledTradesBC skilledtradesbc.ca/labour-mobility · fetched October 9, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 11, 2026
- Exam Rewrites | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/exam-rewrites · fetched October 11, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
Frequently asked questions
2
Do you need a licence to work as a boilermaker endorsement: marine fitter in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
Certification exam, Level exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.