How to Become a Metal Fabricator (fitter) in British Columbia
Do you need certification?
Certification is voluntary
Metal fabricator (fitter) is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Metal Fabricator (Fitter)”
From skilledtradesbc.ca/find-your-trade, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained outside Canada: 5 steps (1 fee depends on your situation and is not in the total)
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained outside Canada
0 of 5 done
- 1 fee depends on your situation and is not in the total
- 4 steps without a listed fee
- Listed time: 24 months (only 1 of 5 steps state a time)
-
Search for the trade and review the Employer Declaration or Statutory Declaration form and Program Profile to confirm the required hours of work experience, job task percentage, prerequisite credentials and challenge requirements.
Source
“Review the Employer Declaration or Statutory Declaration form (near the bottom of your trade page), where you can find the hours of work experience, percentage of job task experience and any prerequisite credentials required.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Once eligibility is confirmed, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start the application.
Source
“Once you’ve confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Complete and submit the application through the Portal, including an Employer or Statutory Declaration for each period of work experience, with all documents in English.
- Application fee: $120 (paid through the Portal when submitting the challenge application)
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“For each period of work experience listed on your application, you must submit an Employer or Statutory Declaration (near the bottom of your trade page).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - Application fee: $120 (paid through the Portal when submitting the challenge application)
-
Wait to be notified of the outcome of the application.
Source
“Get notified of your application result”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Schedule and pass the certification exam and any practical assessments within 24 months of application approval.
Time: 24 monthsTime source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examSource
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Listed fees for this route
1 fee depends on your situation and is not in the total.
4 steps without a listed fee, so the total may not be the full cost.
Other listed fees
The regulator lists these without tying them to one step, so they are not in the route totals above. Check which apply to you.
- Out-of-province assessment fee: $120
Source
“$120 out-of-province assessment fee. You can pay online, by mail or with a cheque (payable to SkilledTradesBC) with your application.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Requirements
Experience
Applicants must have the required hours and scope of hands-on work experience in the trade.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Other
References will be contacted by phone to verify work experience, and the application will be denied if they cannot be reached.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examAll documents submitted with the application must be in English.
Source
“All documents submitted must be in English.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Already licensed in another province?
Direct transfer
SkilledTradesBC recognizes a Certificate of Qualification from a trade board in another Canadian province or territory, so holders do not have to re-certify or get a re-issued certificate. Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate.”
skilledtradesbc.ca/labour-mobility
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
Certification exam
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Practical assessment
Source
“Some trades may also require a practical assessment in addition to the certification exam.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Language tests
Not stated by the regulator Check with SkilledTradesBC
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| British Columbia | $24.00 | $35.00 | $46.15 | Limited (2 of 5) |
| Canada | $21.00 | $29.00 | $43.30 | — |
Metal fabricators (fitter) in other provinces and territories
- Alberta Voluntary certification
- Saskatchewan Voluntary certification
- Manitoba Voluntary certification
- Ontario Voluntary certification
- Quebec Voluntary certification
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Newfoundland and Labrador Voluntary certification
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Not confirmed yet
Sources checked
- Find Your Trade | SkilledTradesBC skilledtradesbc.ca/find-your-trade · fetched October 9, 2026
- Metal Fabricator (Fitter) | SkilledTradesBC skilledtradesbc.ca/metal-fabricator-fitter · fetched October 9, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 11, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
- Labour Mobility | SkilledTradesBC skilledtradesbc.ca/labour-mobility · fetched October 9, 2026
Frequently asked questions
2
Do you need a licence to work as a metal fabricator (fitter) in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
Certification exam, Practical assessment.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.