How to Become a Metal Fabricator (fitter) Endorsement: Marine Fitter in British Columbia
Do you need certification?
Certification is voluntary
Metal fabricator (fitter) endorsement: marine fitter is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Metal Fabricator (Fitter) Endorsement: Marine Fitter”
From skilledtradesbc.ca/find-your-trade, checked November 10, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 3 steps
- Licensed in another province: 2 steps (1 fee depends on your situation and is not in the total)
- Trained outside Canada: 6 steps (1 fee depends on your situation and is not in the total)
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 3 done
- 3 steps without a listed fee
-
The page directs interested people to learn how to start an apprenticeship.
Source
“Interested in this trade? Learn how to start your apprenticeship.”
skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter -
The page says to register as early as possible to secure a seat for technical training.
Source
“Make sure to register as early as possible to secure a seat for technical training”
skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter -
The program includes 2,460 hours of work-based training.
Source
“Work-Based Training 2460 HOURS”
skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
3 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 2 done
- 1 fee depends on your situation and is not in the total
- 1 step without a listed fee
-
Applicants submit the following documents.
Source
“Please submit the following documents to”
skilledtradesbc.ca/canadian-and-military-certificate-holders -
Applicants pay a $120 out-of-province assessment fee.
- out-of-province assessment fee: $120 (out-of-province)
Source
“$120 out-of-province assessment fee.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Source
“$120 out-of-province assessment fee.”
skilledtradesbc.ca/canadian-and-military-certificate-holders - out-of-province assessment fee: $120 (out-of-province)
Listed fees for this route
1 fee depends on your situation and is not in the total.
1 step without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 6 done
- 1 fee depends on your situation and is not in the total
- 5 steps without a listed fee
-
Applicants check the program requirements and their eligibility.
Source
“Check the program requirements and your eligibility”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Applicants create an account on the SkilledTradesBC Portal.
Source
“Create an account on the SkilledTradesBC Portal”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Applicants submit their application and declaration form(s).
Source
“Submit your application and declaration form(s)”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Applicants pay the $120 application fee through the Portal.
- application fee: $120 (through the Portal)
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - application fee: $120 (through the Portal)
-
Applicants get notified of their application result.
Source
“Get notified of your application result”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Applicants can schedule and pass their certification exam and any applicable practical assessments within 24 months of application approval.
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Listed fees for this route
1 fee depends on your situation and is not in the total.
5 steps without a listed fee, so the total may not be the full cost.
Requirements
Experience
Applicants must have the required hours and scope of hands-on work experience in the trade.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examThe page says this applies if you have work experience in the trade but have never been certified in Canada.
Source
“If you have work experience in the trade but have never been certified in Canada”
skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter
Other
References are contacted by phone to verify work experience, and an application is denied if references cannot be contacted.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examThe applicant's current and/or previous company is called to verify the references' employment.
Source
“Your current and/or previous company will be called to verify that your references work there or previously were employed there.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examApplicants must schedule and pass the certification exam and any applicable practical assessments within 24 months of application approval.
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Already licensed in another province?
Extra steps
The page says holders of a certificate in a skilled trade outside B.C. from another provincial apprenticeship authority or Canadian jurisdiction may be eligible to obtain a Red Seal Endorsement. Source
“If you hold a Certificate in a skilled trade outside of B.C. from another provincial apprenticeship authority or Canadian jurisdiction, you may be eligible to obtain a Red Seal Endorsement.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Submit documents
Source
“Please submit the following documents to”
skilledtradesbc.ca/canadian-and-military-certificate-holdersPay assessment fee
Source
“$120 out-of-province assessment fee.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
Endorsement Exam
Source
“Endorsement Exam Breakdown Chart”
skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter -
certification exam
Source
“you may be eligible to challenge the certification exam as a Trade Qualifier”
skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter -
level exam
Source
“you may be eligible to challenge a level exam to enter the program at the appropriate level”
skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter -
practical assessment
Source
“Some trades may also require a practical assessment in addition to the certification exam.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Language tests
Not stated by the regulator Check with SkilledTradesBC
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
No Job Bank wage or outlook data for this occupation yet.
Metal fabricators (fitter) endorsement: marine fitter in other provinces and territories
- Alberta No regulator found
- Saskatchewan No regulator found
- Manitoba No regulator found
- Ontario No regulator found
- Quebec No regulator found
- New Brunswick No regulator found
- Nova Scotia No regulator found
- Prince Edward Island No regulator found
- Newfoundland and Labrador No regulator found
- Yukon No regulator found
- Northwest Territories No regulator found
- Nunavut No regulator found
Compare metal fabricator (fitter) endorsement: marine fitter licensing across Canada
Sources checked
- Find Your Trade | SkilledTradesBC skilledtradesbc.ca/find-your-trade · fetched November 10, 2026
- Metal Fabricator (Fitter) Endorsement: Marine Fitter | SkilledTradesBC skilledtradesbc.ca/metal-fabricator-fitter-endorsement-marine-fitter · fetched October 9, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 11, 2026
Frequently asked questions
2
Do you need a licence to work as a metal fabricator (fitter) endorsement: marine fitter in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
Endorsement Exam, certification exam, level exam, practical assessment.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.