How to Become a Welder Endorsement: Multi-process Alloy Welding in British Columbia
Do you need certification?
Certification is voluntary
Welder endorsement: multi-process alloy welding is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Welder Endorsement: Multi-Process Alloy Welding (MPAW)”
From skilledtradesbc.ca/find-your-trade, checked November 10, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 4 steps
- Licensed in another province: 2 steps (1 fee depends on your situation and is not in the total)
- Trained outside Canada: 3 steps
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 4 done
- 4 steps without a listed fee
-
Create a SkilledTradesBC Portal account to start your application.
Source
“Create a SkilledTradesBC Portal account to start your application”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw -
Complete technical training of 5 weeks over 1 year.
Source
“Technical Training 5 weeks over 1 year”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw -
Complete 900 hours of work-based training.
Source
“Work-Based Training 900 HOURS”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw -
Take the Endorsement Exam.
Source
“Endorsement Exam Breakdown”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
4 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 2 done
- 1 fee depends on your situation and is not in the total
- 1 step without a listed fee
-
Submit a photocopy of your Certificate of Qualification.
Source
“A photocopy of your Certificate of Qualification”
skilledtradesbc.ca/canadian-and-military-certificate-holders -
Pay the $120 out-of-province assessment fee.
- out-of-province assessment fee: $120 (out-of-province)
Source
“$120 out-of-province assessment fee.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Source
“$120 out-of-province assessment fee.”
skilledtradesbc.ca/canadian-and-military-certificate-holders - out-of-province assessment fee: $120 (out-of-province)
Listed fees for this route
1 fee depends on your situation and is not in the total.
1 step without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 3 done
- 3 steps without a listed fee
-
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier without going through an apprenticeship program.
Source
“If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw -
Submit the Work-based Training Report – Multi-Process Alloy Welding Endorsement Declaration to confirm at least 900 hours of MPAW-related experience after Red-Seal Certification.
Source
“To confirm that the candidate has at least 900 hours of experience in processes directly related to the Multi-Process Alloy Welding (MPAW) Endorsement achieved after Red-Seal Certification.”
skilledtradesbc.ca/forms -
Challenge the certification exam.
Source
“Challenge the Certification Exam”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
3 steps without a listed fee, so the total may not be the full cost.
Requirements
Education
To register, an applicant must hold a Welder – Certificate of Qualification with Interprovincial Red Seal Endorsement or a Welder B – Certificate of Qualification with Interprovincial Red Seal Endorsement.
Source
“To register for this program, you must hold either a Welder – Certificate of Qualification with Interprovincial Red Seal Endorsement or a Welder B – Certificate of Qualification with Interprovincial Red Seal Endorsement.”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw
Experience
A candidate must have at least 900 hours of experience in processes directly related to the MPAW Endorsement achieved after Red-Seal Certification.
Source
“To confirm that the candidate has at least 900 hours of experience in processes directly related to the Multi-Process Alloy Welding (MPAW) Endorsement achieved after Red-Seal Certification.”
skilledtradesbc.ca/formsFor the challenge pathway, an applicant must have work experience in the trade and have never been certified in Canada.
Source
“If you have work experience in the trade but have never been certified in Canada”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw
Already licensed in another province?
Extra steps
The page states that holders of a certificate in a skilled trade outside B.C. from another provincial apprenticeship authority or Canadian jurisdiction may be eligible to obtain a Red Seal Endorsement. Source
“If you hold a Certificate in a skilled trade outside of B.C. from another provincial apprenticeship authority or Canadian jurisdiction, you may be eligible to obtain a Red Seal Endorsement.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
Endorsement Exam
Source
“Endorsement Exam Breakdown”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw -
certification exam
Source
“Challenge the Certification Exam”
skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw
Language tests
Not stated by the regulator Check with SkilledTradesBC
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
No Job Bank wage or outlook data for this occupation yet.
Welder endorsements: multi-process alloy welding in other provinces and territories
- Alberta No regulator found
- Saskatchewan No regulator found
- Manitoba No regulator found
- Ontario No regulator found
- Quebec No regulator found
- New Brunswick No regulator found
- Nova Scotia No regulator found
- Prince Edward Island No regulator found
- Newfoundland and Labrador No regulator found
- Yukon No regulator found
- Northwest Territories No regulator found
- Nunavut No regulator found
Compare welder endorsement: multi-process alloy welding licensing across Canada
Sources checked
- Find Your Trade | SkilledTradesBC skilledtradesbc.ca/find-your-trade · fetched November 10, 2026
- Welder Endorsement: Multi-Process Alloy Welding (MPAW) | SkilledTradesBC skilledtradesbc.ca/welder-endorsement-multi-process-alloy-welding-mpaw · fetched October 9, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
- Forms | SkilledTradesBC skilledtradesbc.ca/forms · fetched October 9, 2026
Frequently asked questions
2
Do you need a licence to work as a welder endorsement: multi-process alloy welding in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
Endorsement Exam, certification exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.