Licensing guide · New Brunswick

How to Become a Computerized Numerical Control Machinist in New Brunswick

Last checked 4 sources checked

Do you need certification?

Certification is voluntary

Computerized numerical control machinist is a voluntary trade in New Brunswick. You can work in the trade without a certificate.

Protected titles
Not listed in the sources checked
Show the source
“Computerized Numerical Control Machinist”

From gnb.ca/en/topic/education-training/apprenticeship-trades/designated..., checked October 11, 2026.

At a glance

Licence status
Voluntary certification See the source
Routes
Annual fees
Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Your roadmap

Every route is listed. Follow the one that matches where you trained.

Trained in Canada

  • Listed one-time fees: $25
  • 3 steps without a listed fee

  1. Get a job in the trade with an employer.

    Source
    “Apprenticeship — obtain employment and register as an apprentice, successfully complete all apprenticeship program requirements such as the on-the-job, technical training requirements and examinations to achieve a Diploma of Apprenticeship and Certificate of Qualification.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/apprentice...

  2. Register as an apprentice with the apprenticeship authority.

    Source
    “Apprenticeship — obtain employment and register as an apprentice, successfully complete all apprenticeship program requirements such as the on-the-job, technical training requirements and examinations to achieve a Diploma of Apprenticeship and Certificate of Qualification.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/apprentice...

  3. Complete all apprenticeship program requirements, including on-the-job and technical training requirements and examinations.

    Source
    “Apprenticeship — obtain employment and register as an apprentice, successfully complete all apprenticeship program requirements such as the on-the-job, technical training requirements and examinations to achieve a Diploma of Apprenticeship and Certificate of Qualification.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/apprentice...

  4. Achieve a Diploma of Apprenticeship and Certificate of Qualification upon successful completion.

    Source
    “Apprenticeship — obtain employment and register as an apprentice, successfully complete all apprenticeship program requirements such as the on-the-job, technical training requirements and examinations to achieve a Diploma of Apprenticeship and Certificate of Qualification.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/apprentice...

Listed fees for this route

One-time total listed: $25

One-time fees listed for Trained in Canada, by type
Fee typeAmountShare
Application $25 100%
One-time total $25 100%

3 steps without a listed fee, so the total may not be the full cost.

Official page for this route

Licensed in another province

  • 2 steps without a listed fee

  1. Provide proof of a certificate of qualification from a jurisdiction outside New Brunswick.

    Source
    “Equivalency Standards — supply proof of a certificate of qualification from a jurisdiction outside New Brunswick and application to challenge the certification examination or to recognize the certification based on equivalent standards.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/apprentice...

  2. Submit an application to challenge the certification examination or to have the certification recognized based on equivalent standards.

    Source
    “Equivalency Standards — supply proof of a certificate of qualification from a jurisdiction outside New Brunswick and application to challenge the certification examination or to recognize the certification based on equivalent standards.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/apprentice...

Listed fees for this route

No one-time fees listed by the regulator for these steps Check with New Brunswick Department of Post-Secondary Education, Training and Labour

2 steps without a listed fee, so the total may not be the full cost.

Official page for this route

Trained outside Canada

  • 5 steps without a listed fee

  1. Get a job in your trade and gain local experience.

    Source
    “Start by getting a job in your trade and gaining local experience then, contact Skilled Trades NB to see if you can challenge the certification exam or if the apprenticeship program is the better path for your success.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  2. Contact Skilled Trades NB to find out whether you can challenge the certification exam or whether the apprenticeship program is the better path.

    Source
    “Start by getting a job in your trade and gaining local experience then, contact Skilled Trades NB to see if you can challenge the certification exam or if the apprenticeship program is the better path for your success.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  3. Have your international education and work experience reviewed to identify credit toward New Brunswick certification.

    Source
    “Assessment of your experience: Your international education and work experience are reviewed to identify credit toward NB certification.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  4. Develop and complete a personalized learning plan created with Skilled Trades NB and your employer to address differences in language, terminology, safety, and trade practices and standards.

    Source
    “Personalized learning plan: Develop and complete a plan is created with Skilled Trades NB and your employer to address differences in language, terminology and safety and trade practices and standards.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  5. Attend training or challenge the exam when ready.

    Source
    “Training and certification exam: Attend training or challenge the exam when ready.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

Listed fees for this route

No one-time fees listed by the regulator for these steps Check with New Brunswick Department of Post-Secondary Education, Training and Labour

5 steps without a listed fee, so the total may not be the full cost.

Official page for this route

Other listed fees

The regulator lists these without tying them to one step, so they are not in the route totals above. Check which apply to you.

Requirements

Conditions the regulator sets on top of the roadmap steps.

Experience

  • A person who has gained the equivalent of 10,800 hours of practical experience in the computerized numerical controls machinist occupation may apply to challenge the certification examination.

    Source
    “A person who has gained the equivalent of 10,800 hours of practical experience in the computerized numerical controls machinist occupation may apply to challenge the certification examination.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/designated...

  • A New Brunswick Diploma of Apprenticeship and Certificate of Qualification are awarded upon successful completion of 7,200 hours of on the job and technical training and the final examination.

    Source
    “A New Brunswick Diploma of Apprenticeship and Certificate of Qualification are awarded upon successful completion of 7,200 hours of on the job and technical training and the final examination.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/designated...

Already licensed in another province?

Direct transfer

Tradespeople with a valid out-of-province Certificate of Qualification or Red Seal endorsement can work in New Brunswick using their existing credential without first obtaining a New Brunswick Certificate of Qualification.

Source
“Tradespeople with a valid out-of-province Certificate of Qualification (C of Q) or Red Seal endorsement can work in New Brunswick using their existing credential.”
gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

Processing time: Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Check a move between two provinces

Credential assessment

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Exams

Language tests

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Compare scores across provinces and professions

Canadian experience

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Supervised practice

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Demand and pay

No Job Bank wage or outlook data for this occupation yet.

Computerized numerical control machinists in other provinces and territories

Regulated in 0 of the other 12 jurisdictions checked so far. The rules differ from one place to the next.

  • British Columbia Not confirmed yet
  • Alberta Not confirmed yet
  • Saskatchewan Not confirmed yet
  • Manitoba Not confirmed yet
  • Ontario Not confirmed yet
  • Quebec Not confirmed yet
  • Nova Scotia Not confirmed yet
  • Prince Edward Island Not confirmed yet
  • Newfoundland and Labrador Not confirmed yet
  • Yukon Not confirmed yet
  • Northwest Territories Not confirmed yet
  • Nunavut Not confirmed yet

Compare computerized numerical control machinist licensing across Canada

Sources checked

Pages read on October 11, 2026.

  1. List of designated occupations - gnb.ca gnb.ca/en/topic/education-training/apprenticeship-trades/designated... · fetched October 11, 2026
  2. The apprenticeship and occupational certification program - gnb.ca gnb.ca/en/topic/education-training/apprenticeship-trades/apprentice... · fetched October 11, 2026
  3. Fees and forms - gnb.ca gnb.ca/en/topic/education-training/apprenticeship-trades/fees-forms... · fetched October 11, 2026
  4. Internationally and nationally trained or certified trades people - gnb.ca gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr... · fetched October 11, 2026

Frequently asked questions

2

Do you need a licence to work as a computerized numerical control machinist in New Brunswick?

No. Certification is available, but it is not required to work in the trade in New Brunswick. Certification is managed by the New Brunswick Department of Post-Secondary Education, Training and Labour.

Which exams are required?

Certification examination, Final examination.

Getting Licensed? Get Your Resume Ready Too

Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.

Schedule a Call

Free consultation. No commitment.