Licensing guide · New Brunswick

How to Become a Heavy Equipment Operator (compaction Roller) in New Brunswick

Last checked 3 sources checked

Do you need certification?

Certification is voluntary

Heavy equipment operator (compaction roller) is a voluntary trade in New Brunswick. You can work in the trade without a certificate.

Protected titles
Not listed in the sources checked
Show the source
“New Brunswick has 12 compulsory trades under the Apprenticeship and Occupational Certification Act (AOC Act). In these trades, workers must hold the appropriate trade certification or be registered as an apprentice to perform the work.”

From gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr..., checked October 11, 2026.

At a glance

Licence status
Voluntary certification See the source
Routes
Annual fees
Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Your roadmap

Every route is listed. Follow the one that matches where you trained.

Trained in Canada

No separate route for this group.

Source
“Apprenticeship training is not available for this occupation.”
gnb.ca/en/topic/education-training/apprenticeship-trades/designated...

Official page for this route

Licensed in another province

  • 1 step without a listed fee

  1. A tradesperson with a valid out-of-province Certificate of Qualification or Red Seal endorsement can work in New Brunswick using that existing credential.

    Source
    “Tradespeople with a valid out-of-province Certificate of Qualification (C of Q) or Red Seal endorsement can work in New Brunswick using their existing credential.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

Listed fees for this route

No one-time fees listed by the regulator for these steps Check with New Brunswick Department of Post-Secondary Education, Training and Labour

1 step without a listed fee, so the total may not be the full cost.

Official page for this route

Trained outside Canada

  • Listed one-time fees: $250
  • 1 fee depends on your situation and is not in the total
  • 3 steps without a listed fee

  1. The applicant first gets a job in their trade and gains local experience.

    Source
    “Start by getting a job in your trade and gaining local experience then, contact Skilled Trades NB to see if you can challenge the certification exam or if the apprenticeship program is the better path for your success.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  2. The applicant contacts Skilled Trades NB to find out whether they can challenge the certification exam or whether the apprenticeship program is the better path.

    Source
    “Start by getting a job in your trade and gaining local experience then, contact Skilled Trades NB to see if you can challenge the certification exam or if the apprenticeship program is the better path for your success.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  3. The applicant's international education and work experience are reviewed to identify credit toward New Brunswick certification.

    Source
    “Assessment of your experience: Your international education and work experience are reviewed to identify credit toward NB certification.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  4. The applicant develops and completes a personalized learning plan created with Skilled Trades NB and their employer to address differences in language, terminology, safety, and trade practices and standards.

    Source
    “Personalized learning plan: Develop and complete a plan is created with Skilled Trades NB and your employer to address differences in language, terminology and safety and trade practices and standards.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

  5. The applicant attends training or challenges the certification exam when ready.

    Source
    “Training and certification exam: Attend training or challenge the exam when ready.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

Listed fees for this route

One-time total listed: $250

One-time fees listed for Trained outside Canada, by type
Fee typeAmountShare
Exams $250 100%
One-time total $250 100%

1 fee depends on your situation and is not in the total.

3 steps without a listed fee, so the total may not be the full cost.

Official page for this route

Other listed fees

The regulator lists these without tying them to one step, so they are not in the route totals above. Check which apply to you.

Requirements

Conditions the regulator sets on top of the roadmap steps.

Experience

  • A person who has gained the equivalent of 900 hours of practical experience in the heavy equipment operator (compaction roller) occupation may apply to challenge the certification examination.

    Source
    “A person who has gained the equivalent of 900 hours of practical experience in the heavy equipment operator (compaction roller) occupation may apply to challenge the certification examination.”
    gnb.ca/en/topic/education-training/apprenticeship-trades/designated...

Already licensed in another province?

Direct transfer

Tradespeople with a valid out-of-province Certificate of Qualification or Red Seal endorsement can work in New Brunswick using their existing credential without first obtaining a New Brunswick Certificate of Qualification.

Source
“New Brunswick recognizes valid Red Seal endorsements, Certificates of Qualification (C of Q), and other trade certificates issued by Canadian provinces and territories. This means certified tradespeople can move to New Brunswick and work in their trade without first obtaining a New Brunswick Certificate of Qualification (C of Q).”
gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr...

Processing time: Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Check a move between two provinces

Credential assessment

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Exams

Language tests

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Compare scores across provinces and professions

Canadian experience

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Supervised practice

Not stated by the regulator Check with New Brunswick Department of Post-Secondary Education, Training and Labour

Demand and pay

No Job Bank wage or outlook data for this occupation yet.

Heavy equipment operators (compaction roller) in other provinces and territories

Regulated in 0 of the other 12 jurisdictions checked so far. The rules differ from one place to the next.

  • British Columbia Not confirmed yet
  • Alberta Not confirmed yet
  • Saskatchewan Not confirmed yet
  • Manitoba Not confirmed yet
  • Ontario Not confirmed yet
  • Quebec Not confirmed yet
  • Nova Scotia Not confirmed yet
  • Prince Edward Island Not confirmed yet
  • Newfoundland and Labrador Not confirmed yet
  • Yukon Not confirmed yet
  • Northwest Territories Not confirmed yet
  • Nunavut Not confirmed yet

Compare heavy equipment operator (compaction roller) licensing across Canada

Sources checked

Pages read on October 11, 2026.

  1. Internationally and nationally trained or certified trades people - gnb.ca gnb.ca/en/topic/education-training/apprenticeship-trades/trained-tr... · fetched October 11, 2026
  2. List of designated occupations - gnb.ca gnb.ca/en/topic/education-training/apprenticeship-trades/designated... · fetched October 11, 2026
  3. Fees and forms - gnb.ca gnb.ca/en/topic/education-training/apprenticeship-trades/fees-forms... · fetched October 11, 2026

Frequently asked questions

2

Do you need a licence to work as a heavy equipment operator (compaction roller) in New Brunswick?

No. Certification is available, but it is not required to work in the trade in New Brunswick. Certification is managed by the New Brunswick Department of Post-Secondary Education, Training and Labour.

Which exams are required?

certification examination.

Getting Licensed? Get Your Resume Ready Too

Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.

Schedule a Call

Free consultation. No commitment.