How to Become a Mould Designer in Ontario
Do you need certification?
Certification is voluntary
Mould designer is a voluntary trade in Ontario. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“As there is no certifying exam in this trade, Skilled Trades Ontario does not issue a Certificate of Qualification and therefore cannot accept Trade Equivalency Assessment applications for this trade.”
From skilledtradesontario.ca/trade-information/mould-designer, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 0 steps
- Licensed in another province: 3 steps
- Trained outside Canada: no separate route
- Annual fees
- Not stated by the regulator Check with Skilled Trades Ontario
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
Steps not listed by the regulator Check with Skilled Trades Ontario
Licensed in another province
0 of 3 done
- 3 steps without a listed fee
-
The applicant finds a sponsor in Ontario.
-
The applicant applies for an apprenticeship program in Ontario and indicates on the application that they have completed training in another province.
Source
“2. Apply for an apprenticeship program in Ontario. - On your application you will need to check off the section of the form that you have completed training in another province.”
skilledtradesontario.ca/apprenticeship/current-apprentices -
Skilled Trades Ontario contacts the applicant to verify their out-of-province training after the application is submitted.
Source
“4. Skilled Trades Ontario will contact you to verify your out-of-province training after you have submitted your application.”
skilledtradesontario.ca/apprenticeship/current-apprentices
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Skilled Trades Ontario
3 steps without a listed fee, so the total may not be the full cost.
Trained outside Canada
No separate route for this group. Source
“As there is no certifying exam in this trade, Skilled Trades Ontario does not issue a Certificate of Qualification and therefore cannot accept Trade Equivalency Assessment applications for this trade.”
skilledtradesontario.ca/trade-information/mould-designer
Requirements
Not stated by the regulator Check with Skilled Trades Ontario
Already licensed in another province?
Direct transfer
A person with an authorizing certificate from another Canadian province or territory can apply to have the credential verified, and no further training or examination is required. Source
“If you have an authorizing certificate from another Canadian province or territory you can apply to have your credential verified and no further training or examination will be required.”
skilledtradesontario.ca/experienced-workers
Processing time: Not stated by the regulator Check with Skilled Trades Ontario
Credential assessment
Not stated by the regulator Check with Skilled Trades Ontario
Exams
Not stated by the regulator Check with Skilled Trades Ontario
Language tests
Not stated by the regulator Check with Skilled Trades Ontario
Canadian experience
Not stated by the regulator Check with Skilled Trades Ontario
Supervised practice
Not stated by the regulator Check with Skilled Trades Ontario
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| Ontario | $23.00 | $38.00 | $52.88 | Limited (2 of 5) |
| Canada | $23.08 | $35.00 | $51.28 | — |
Mould designers in other provinces and territories
- British Columbia Not confirmed yet
- Alberta Not confirmed yet
- Saskatchewan Not confirmed yet
- Manitoba Not confirmed yet
- Quebec Title protected
- New Brunswick Not confirmed yet
- Nova Scotia Not confirmed yet
- Prince Edward Island Not confirmed yet
- Newfoundland and Labrador Not confirmed yet
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Not confirmed yet
Sources checked
- Mould Designer - Skilled Trades Ontario skilledtradesontario.ca/trade-information/mould-designer · fetched October 11, 2026
- Current apprentices - Skilled Trades Ontario skilledtradesontario.ca/apprenticeship/current-apprentices · fetched October 10, 2026
- Experienced workers - Skilled Trades Ontario skilledtradesontario.ca/experienced-workers · fetched October 10, 2026
Frequently asked questions
1
Do you need a licence to work as a mould designer in Ontario?
No. Certification is available, but it is not required to work in the trade in Ontario. Certification is managed by Skilled Trades Ontario.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.