How to Become a Saw Filer in British Columbia
Do you need certification?
Certification is voluntary
Saw filer is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Forestry Bookmark Saw Filer”
From skilledtradesbc.ca/find-your-trade, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: no separate route
- Licensed in another province: 1 step
- Trained outside Canada: 6 steps, listed one-time fees $120
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
No separate route for this group. Source
“If you have extensive experience in your trade, you may be eligible to challenge the certification exam as a Trade Qualifier and become certified without going through an apprenticeship program.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Licensed in another province
0 of 1 done
- 1 step without a listed fee
-
You hold a full Certificate of Qualification from a trade board in another Canadian province or territory and are in good standing.
Source
“Recognition applies to individuals who are certified and in good standing in their trade with the appropriate provincial or territorial authority.”
skilledtradesbc.ca/index%2Ephp/labour-mobility
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
1 step without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 6 done
- Listed one-time fees: $120
- 5 steps without a listed fee
- Listed time: 25.8 to 26.3 months (only 2 of 6 steps state a time)
-
Search the Find Your Trade page to find the B.C. trade equivalent of your foreign certification.
Source
“Visit the Find Your Trade page to search for your trade. The Record Books and the Challenge a Trade section on each trade page may help you determine what is required to become certified in that trade.”
skilledtradesbc.ca/get-certified/newcomers-international-tradespersons -
Review the program requirements and confirm you have the required hours and scope of hands-on work experience in the trade.
Source
“Before you apply, please ensure: - You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Create a SkilledTradesBC Portal account and select the option to challenge a certification exam to start your application.
Source
“Once you’ve confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Complete and submit your application through the Portal with an Employer or Statutory Declaration for each period of work experience, with all documents in English.
- Application fee: $120
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“Complete and submit your application by following the prompts on the Portal. Follow this step-by-step guide for detailed instructions on what to expect during the application process. All documents submitted must be in English.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - Application fee: $120
-
Wait for your Trade Qualifier application to be reviewed and processed, which currently takes 8 to 10 weeks.
Time: 8 to 10 weeksTime source
“Currently, it takes 8 to 10 weeks for an application to get reviewed and processed.”
skilledtradesbc.ca/get-certified/newcomers-international-tradespersonsSource
“How long will it take to get my Trade Qualifier application approved? Currently, it takes 8 to 10 weeks for an application to get reviewed and processed.”
skilledtradesbc.ca/get-certified/newcomers-international-tradespersons -
After approval, schedule and pass your certification exam, and any practical assessments if applicable, within 24 months.
Time: 24 monthsTime source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examSource
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Listed fees for this route
One-time total listed: $120
| Fee type | Amount | Share |
|---|---|---|
| Application | $120 | 100% |
| One-time total | $120 | 100% |
5 steps without a listed fee, so the total may not be the full cost.
Other listed fees
The regulator lists these without tying them to one step, so they are not in the route totals above. Check which apply to you.
- Out-of-province assessment fee: $120
Source
“$120 out-of-province assessment fee. You can pay online, by mail or with a cheque (payable to SkilledTradesBC) with your application.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Requirements
Experience
You must have the required hours and scope of hands-on work experience in the trade before applying to challenge the certification exam.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Other
Your references will be contacted by phone to verify your work experience, and the application will be denied if they cannot be contacted.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examAll documents submitted with the application must be in English.
Source
“All documents submitted must be in English.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Already licensed in another province?
Direct transfer
If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it and you will not have to re-certify or get a re-issued certificate. Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate.”
skilledtradesbc.ca/index%2Ephp/labour-mobility
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
certification exam
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Certificate of Qualification (CofQ) Exam
Source
“OPSN 2016 0011 | Saw Filer | Reactivation of the Certificate of Qualification (CofQ) Exam | Issued: June 29, 2016”
skilledtradesbc.ca/program-standards-updates
Language tests
No minimum test score stated by the regulator Check with SkilledTradesBC
Exemptions: IELTS/CELPIP English language exam results are not required to become a skilled trade apprentice or to write an exam with SkilledTradesBC. Source
“No, this is not required to become a skilled trade apprentice or to write an exam with us.”
skilledtradesbc.ca/get-certified/newcomers-international-tradespersons
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
No Job Bank wage or outlook data for this occupation yet.
Saw filers in other provinces and territories
- Alberta Not confirmed yet
- Saskatchewan Not confirmed yet
- Manitoba Not confirmed yet
- Ontario Voluntary certification
- Quebec Voluntary certification
- New Brunswick Not confirmed yet
- Nova Scotia Not confirmed yet
- Prince Edward Island Not confirmed yet
- Newfoundland and Labrador Not confirmed yet
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Not confirmed yet
Sources checked
- Find Your Trade | SkilledTradesBC skilledtradesbc.ca/find-your-trade · fetched October 9, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 11, 2026
- Labour Mobility | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/labour-mobility · fetched October 11, 2026
- Newcomers and International Tradespersons | SkilledTradesBC skilledtradesbc.ca/get-certified/newcomers-international-tradespersons · fetched October 10, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
- Program Standards Updates | SkilledTradesBC skilledtradesbc.ca/program-standards-updates · fetched October 10, 2026
Frequently asked questions
2
Do you need a licence to work as a saw filer in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
certification exam, Certificate of Qualification (CofQ) Exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.