How to Become an Ironworker (Reinforcing) in Newfoundland and Labrador
Do you need certification?
Certification is voluntary
Ironworker (Reinforcing) is a voluntary trade in Newfoundland and Labrador. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Trade Designation Changes – Ironworker (Reinforcing); Ironworker (Structural/Ornamental): The PACB has updated these trade designations to ‘Training and Certification’.”
From gov.nl.ca/atcd/news-updates, checked October 10, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 3 steps
- Licensed in another province: 2 steps
- Trained outside Canada: 0 steps
- Annual fees
- Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 3 done
- 3 steps without a listed fee
-
Register as an apprentice with the Apprenticeship and Trades Certification Division.
Source
“1. Register as an Apprentice with the Apprenticeship and Trades Certification Division”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... -
Talk to an Apprenticeship Program Officer to begin.
Source
“2. Talk to an Apprenticeship Program Officer to begin.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... -
You will be connected with a Program Development Specialist who will guide you through the RPL process.
Source
“3. You will then be connected with a Program Development Specialist who will guide you through the RPL process.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/...
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division
3 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 2 done
- 2 steps without a listed fee
-
If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.
Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.”
gov.nl.ca/atcd/journeypersons/cq -
The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one.
Source
“The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division
2 steps without a listed fee, so the total may not be the full cost.
Trained outside Canada
Steps not listed by the regulator Check with Apprenticeship and Trades Certification Division
Requirements
Experience
To become a trade qualifier, you need at least one and a half times the on-the-job work experience of an apprenticeship term in your trade.
Source
“- At least one and a half (1.5) times the on-the-job work experience of an apprenticeship term in your trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers
Other
You need verified documentation of your work skills, verified by a certified journeyperson in your trade.
Source
“- Verified documentation of your work skills, verified by a certified journeyperson in your trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiersYou need documented verification of time and hours worked.
Source
“- Documented verification of time and hours worked.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers
Already licensed in another province?
Direct transfer
If you have a Certificate of Qualification from another Canadian province or territory, you complete an application form and the Division verifies your information and can provide an equivalency letter. Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form. The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq
Processing time: Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Credential assessment
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Exams
-
certification exam
Source
“Pass the certification examination and you will earn a Certificate of Qualification.”
gov.nl.ca/atcd/journeypersons/cq
Language tests
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Canadian experience
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Supervised practice
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| Newfoundland and Labrador | $32.00 | $41.09 | $48.11 | Limited (2 of 5) |
| Canada | $29.00 | $43.00 | $49.80 | — |
Wages by region and job outlook in Newfoundland and Labrador
Ironworkers (Reinforcing) in other provinces and territories
- British Columbia Voluntary certification
- Alberta Certification required
- Saskatchewan Voluntary certification
- Manitoba Not confirmed yet
- Ontario Voluntary certification
- Quebec Certification required
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Not confirmed yet
Sources checked
- News and Updates - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/news-updates · fetched October 9, 2026
- Recognition of Prior Learning - Frequently Asked Questions - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... · fetched October 10, 2026
- Certificate of Qualification - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons/cq · fetched October 10, 2026
- Trade Qualifiers - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers · fetched October 10, 2026
Frequently asked questions
2
Do you need a licence to work as an ironworker (Reinforcing) in Newfoundland and Labrador?
No. Certification is available, but it is not required to work in the trade in Newfoundland and Labrador. Certification is managed by the Apprenticeship and Trades Certification Division.
Which exams are required?
certification exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.