How to Become an Instrumentation and Control Technician in Nova Scotia
Do you need certification?
Certification is voluntary
Instrumentation and control technician is a voluntary trade in Nova Scotia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Obtain a provincial certificate without writing an exam. To apply for the provincial certificate, submit the Landscape form at Forms for Apprentices.”
From nsapprenticeship.ca/trades/trade/restoration-stone-mason, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 4 steps
- Annual fees
- Not stated by the regulator Check with Nova Scotia Apprenticeship Agency
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 4 done
- 4 steps without a listed fee
-
Start working with a certified journeyperson and begin your apprenticeship right away, with no experience needed.
Source
“Start working with a certified journeyperson and begin your apprenticeship right away - no experience needed.”
nsapprenticeship.ca/get-started/discover-trades/instrumentation-and... -
Complete, sign and submit an application package to the Nova Scotia Apprenticeship Agency to enter into an apprenticeship agreement with your employer.
Source
“Once a potential apprentice and an employer decide to enter into an apprenticeship agreement, an application package must be completed, signed and submitted to the Nova Scotia Apprenticeship Agency.”
nsapprenticeship.ca/register-apprentice -
Complete the required apprenticeship hours and obtain the four industry certificates.
Source
“Apprentices who obtain these four industry certificates + the required hours can either:”
nsapprenticeship.ca/trades/trade/restoration-stone-mason -
Either write the Red Seal Exam for Red Seal Certification, or obtain a provincial certificate without writing an exam by submitting the Landscape form.
Source
“Write the Red Seal Exam for Red Seal Certification; or Obtain a provincial certificate without writing an exam. To apply for the provincial certificate, submit the Landscape form at Forms for Apprentices.”
nsapprenticeship.ca/trades/trade/restoration-stone-mason
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Nova Scotia Apprenticeship Agency
4 steps without a listed fee, so the total may not be the full cost.
Requirements
Not stated by the regulator Check with Nova Scotia Apprenticeship Agency
Already licensed in another province?
Not stated
The pages do not state how someone already licensed in another Canadian province or territory registers in this trade in Nova Scotia. Source
“If you are an Out-of-province/territory apprentice planning to work TEMPORARILY in Nova Scotia: Make sure you carry your apprentice ID card. You do NOT have to register again in Nova Scotia.”
nsapprenticeship.ca/get-started/labour-mobility/apprentice-mobility
Processing time: Not stated by the regulator Check with Nova Scotia Apprenticeship Agency
Credential assessment
Not stated by the regulator Check with Nova Scotia Apprenticeship Agency
Exams
-
Red Seal Exam
Source
“Write the Red Seal Exam for Red Seal Certification; or Obtain a provincial certificate without writing an exam.”
nsapprenticeship.ca/trades/trade/restoration-stone-mason
Language tests
Not stated by the regulator Check with Nova Scotia Apprenticeship Agency
Canadian experience
Not stated by the regulator Check with Nova Scotia Apprenticeship Agency
Supervised practice
Not stated by the regulator Check with Nova Scotia Apprenticeship Agency
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| Nova Scotia | $24.30 | $37.42 | $62.54 | Limited (2 of 5) |
| Canada | $31.00 | $46.00 | $65.78 | — |
Instrumentations and control technicians in other provinces and territories
- British Columbia Voluntary certification
- Alberta Voluntary certification
- Saskatchewan Voluntary certification
- Manitoba Certification required
- Ontario Voluntary certification
- Quebec Not confirmed yet
- New Brunswick Voluntary certification
- Prince Edward Island Voluntary certification
- Newfoundland and Labrador Voluntary certification
- Yukon Voluntary certification
- Northwest Territories Voluntary certification
- Nunavut Voluntary certification
Compare instrumentation and control technician licensing across Canada
Sources checked
- Trades in Nova Scotia | Nova Scotia Apprenticeship Agency nsapprenticeship.ca/trades/trade/restoration-stone-mason · fetched October 9, 2026
- Instrumentation and Control Technician | Nova Scotia Apprenticeship Agency nsapprenticeship.ca/get-started/discover-trades/instrumentation-and... · fetched October 9, 2026
- Register as an Apprentice | Nova Scotia Apprenticeship Agency nsapprenticeship.ca/register-apprentice · fetched October 9, 2026
- Apprentice Mobility | Nova Scotia Apprenticeship Agency nsapprenticeship.ca/get-started/labour-mobility/apprentice-mobility · fetched October 9, 2026
Frequently asked questions
2
Do you need a licence to work as an instrumentation and control technician in Nova Scotia?
No. Certification is available, but it is not required to work in the trade in Nova Scotia. Certification is managed by the Nova Scotia Apprenticeship Agency.
Which exams are required?
Red Seal Exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.