How to Become a Machinist in British Columbia
Do you need certification?
Certification is voluntary
Machinist is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Construction Bookmark Machinist”
From skilledtradesbc.ca/find-your-trade, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Licensed in another province: 1 step
- Trained outside Canada: 5 steps, listed one-time fees $120
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Licensed in another province
0 of 1 done
- 1 step without a listed fee
-
You must hold a Certificate of Qualification issued by a trade board in Canada, which SkilledTradesBC will recognize.
Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it.”
skilledtradesbc.ca/index%2Ephp/labour-mobility
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
1 step without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 5 done
- Listed one-time fees: $120
- 4 steps without a listed fee
- Listed time: 1.8 to 2.3 months (only 1 of 5 steps state a time)
-
Search for your trade and review the Employer Declaration or Statutory Declaration form to find the required hours of work experience, job task experience and any prerequisite credentials.
Source
“Review the Employer Declaration or Statutory Declaration form (near the bottom of your trade page), where you can find the hours of work experience, percentage of job task experience and any prerequisite credentials required.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Once you have confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.
Source
“Once you’ve confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Complete and submit your application through the Portal, submitting an Employer or Statutory Declaration for each period of work experience listed, with all documents in English.
- Application fee: $120
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“Complete and submit your application by following the prompts on the Portal. Follow this step-by-step guide for detailed instructions on what to expect during the application process. All documents submitted must be in English.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - Application fee: $120
-
After submitting, you will be notified of your application result.
Time: 8 to 10 weeksTime source
“Currently, it takes 8 to 10 weeks for an application to get reviewed and processed.”
skilledtradesbc.ca/get-certified/newcomers-international-tradespersonsSource
“Get notified of your application result”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
You must schedule and pass your certification exam, and practical assessments if applicable, within 24 months of your application approval.
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Listed fees for this route
One-time total listed: $120
| Fee type | Amount | Share |
|---|---|---|
| Application | $120 | 100% |
| One-time total | $120 | 100% |
4 steps without a listed fee, so the total may not be the full cost.
Other listed fees
The regulator lists these without tying them to one step, so they are not in the route totals above. Check which apply to you.
- Out-of-province assessment fee: $120
Source
“$120 out-of-province assessment fee. You can pay online, by mail or with a cheque (payable to SkilledTradesBC) with your application.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Requirements
Experience
You must have the required hours and scope of hands-on work experience in the trade.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Other
Your references will be contacted by phone to verify your work experience, and if they cannot be contacted the application will be denied.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examYour current or previous company will be called to verify that your references work or worked there.
Source
“Your current and/or previous company will be called to verify that your references work there or previously were employed there.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Already licensed in another province?
Direct transfer
If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it and you will not have to re-certify or get a re-issued certificate. Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate.”
skilledtradesbc.ca/index%2Ephp/labour-mobility
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
Certification exam
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Practical assessment
Source
“Some trades may also require a practical assessment in addition to the certification exam.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Language tests
No minimum test score stated by the regulator Check with SkilledTradesBC
Exemptions: IELTS or CELPIP results are not required to become a skilled trade apprentice or to write an exam with SkilledTradesBC. Source
“No, this is not required to become a skilled trade apprentice or to write an exam with us.”
skilledtradesbc.ca/get-certified/newcomers-international-tradespersons
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| British Columbia | $25.00 | $38.00 | $46.29 | Moderate (3 of 5) |
| Canada | $21.00 | $30.00 | $41.50 | — |
Machinists in other provinces and territories
- Alberta Voluntary certification
- Saskatchewan Voluntary certification
- Manitoba Voluntary certification
- Ontario Voluntary certification
- Quebec Voluntary certification
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Newfoundland and Labrador Voluntary certification
- Yukon Voluntary certification
- Northwest Territories Voluntary certification
- Nunavut Voluntary certification
Sources checked
- Find Your Trade | SkilledTradesBC skilledtradesbc.ca/find-your-trade · fetched October 9, 2026
- Labour Mobility | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/labour-mobility · fetched October 11, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 11, 2026
- Newcomers and International Tradespersons | SkilledTradesBC skilledtradesbc.ca/get-certified/newcomers-international-tradespersons · fetched October 10, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
Frequently asked questions
2
Do you need a licence to work as a machinist in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
Certification exam, Practical assessment.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.